Openttd maglev plus#

Truck parking tiles will only work if built with normal or electrified rail types selected. The truck parking tiles display trucks depending on the amount of cargo waiting at the station. If there is track both sides of the buffer, a back-to-back double buffer will be used. If there is a track that the buffer can connect to, it will orientate itself in the direction of the track.

The north/south orientation of the buffers is automatically controlled by the direction of connected rails or platforms. For this to work, always build a PBS signal on the track leading to the building, otherwise the track will not be reserved and the door will remain closed. If PBS is enabled, in addition to requiring a connecting rail, the doors only open when the track is reserved. In cases where PBS is disabled, the doors open when a rail, a station platform or a buffer is connected to the shed door. The doors will also remain closed if no rails are connected. Some buildings such as the engine sheds and valuables sheds, have doors controlled by PBS (Path Based Signalling). Stations and station tiles that are animated: Note: station animation requires OpenTTD r12798 or greater. If over-building or removing tiles from an animation, it is advisable to remove or overbuild all the tiles of the animation (i.e. new docks enabled, ship depot disabled, standard track overlays used.Īnimations that span multiple tiles (overhead crane, gantry cranes etc.) require some special considerations when modifying the station. With no parameters set they default to '0 1 0' i.e.

3 - use normal rail overlays for both the monorail and maglev slots.

2 - use normal rail overlays for the maglev slot.

1 - use normal rail overlays for the monorail slot.

0 (default) - use monorail and maglev overlays.

For compatibility with other track replacement GRFs, the parameter allows the overlays for the monorail and/or maglev track slots to be set to suit. In the case of narrow gauge rails (f), the Canadian Trainset (f) and metro rails (f) the GRF is detected and the correct overlay is used.

When a GRF that replaces monorail or maglev is being used, the normal rail overlay is usually required. Different overlays are used depending on the track type (normal rail, monorail or maglev). The third parameter controls track overlays used by the mineral unloader station and the road crossing. In both cases '0' enables the new graphics, '1' disables then. The first parameter controls the docks, the second controls the ship depot. In earlier versions, including 0.6.3, the stations can still be used but they won't be animated. Version required: 0.6.1 or nightly build from r12674 onwardsĪnimated stations are only supported by OpenTTD since nightly build r12798. Platforms and non-track tiles are included that display the amount of cargo waiting at the station. Most animations are triggered by activity at the station, such as trains arriving/leaving and cargo being delivered.

Openttd maglev plus#

It includes support for the standard TTD industries plus many of the additional industry GRFs.įeatures include animation of the various cranes and warehouse doors etc. It includes stations and facilities suitable for freight cargo. Spiritual sucessor of MMT, Modern Maglev Trains.Industrial Stations Renewal is a set of stations for TTDPatch and OpenTTD. Contains the real maglev trains from around the world that are/have been commercially used.